Home > Hard Drive > How To Make Ide Boot Instead Of Sata

How To Make Ide Boot Instead Of Sata


Counting unit squares circle passes through What are the measurable prerequisites of strength and/or flexiblity for starting to climb in a climbing gym? Just a note to say the alternative method described here using safe mode did not work. General Information ............... so after boot i've got this message: "Error loading operating system".

Garth Oswald Brilliant!! There doesn't appear to be a place in the BIOS to set boot to be SATA instead of IDE, and it is clearly defaulting to the IDE drive if an IDE Bandhan Islam VG I don't see the option for changing the SATA option from IDE to AHCI or Raid in BIOS in HP laptop. (Insyde BIOS). by esemones / July 19, 2005 8:12 AM PDT My new computer has a SATA Maxtor drive as the primary.

How To Make Ide Boot Instead Of Sata

When I boot up the computer it says AHCI BIOS NOT INSTALLED and then hangs and asks me to either press F1 to continue or F2 for setup. New SSD performing well in AHCI mode. Change the IDE drive jumper to Single or Master. In bios I don't have sata as an option in the boot sequence, only a:, c:, or d:.

I have an Intel motherboard with two built in IDE controllers and two built in SATA controllers. Any assistance would be greatly appreciated. Print How helpful was this article to you? 5 - Very Helpful 4 3 - Somewhat Helpful 2 1 - Not Helpful Related Articles SATA Hard Drive Not Appearing when Running Ide And Sata Drives In Same Computer I have a SATA drive as the primary and and IDE slave.

I have a newer computer with both SATA and IDE and have both a SATA and IDE drives and controllers - most newer boards with SATA will have 4 SATA connections Then how to switch SATA hard disk mode from IDE to AHCI or RAID in BIOS after installing Windows so that you would not need to repair or reinstall Windows? Sorry to reject your answer, but I have already reformatted the drive and there are no boot files located in the root folder of the SATA drive.I think the answer lies useful reference I noticed that when GoBack was being installed, it created a gobackio.bin file on my C: drive (IDE primary master) and my F: drive (the SATA drive).

After he got his computer (a RAID machine), back in good working order I again connected my SATA drive (containing his WinXP) to my machine.After enabling it in the BIOS (A06), Which Portion Of The Bios Manages Essential Devices Before The Operating System Is Launched? BootIt Bare Metal ............... I'll switch the optical to slave and hdd to master and see what happens. Proffitt Forum moderator / December 10, 2006 3:26 AM PST In reply to: SATA HDD + IDE drives w/ SATA adapters Burying a new discussion here is not going to find

Motherboard With Ide And Sata Ports

The basic procedure to accomplish this is as follows: Ensure that you have the appropriate drivers for your SATA controller. Turn on your system and your computer will boot to your xp os then you do all your formatting on your sata drive. How To Make Ide Boot Instead Of Sata Hi,I edit and modify the boot.ini to make requisite changes to reflect the correct boot partition/drive.I never use any 3rd part software (unless it is absolutely imperative) and I agree with How To Connect Ide Hard Drive To Sata Motherboard As best I recall, Dell Optiplex PCs do not have a configurable boot sequence in BIOS.

MakeDisk ............... This fixed it though, thanks! I have deleted everything from the SATA drive and have also reformatted it. The posting of advertisements, profanity, or personal attacks is prohibited. Sata And Ide Hard Drives Together

Whenever I changed to RAID in the BIOS Windows wouldn't start. If these are set incorrect then weird things happen. If I connect an IDE drive to either of the IDE connectors on the motherboard where the SATA drive is set to be the boot drive, bootup fails with an error Flag Permalink This was helpful (1) Collapse - It's all about the controllers by DJPython / July 22, 2005 5:53 AM PDT In reply to: Mixing SATA and IDE drives in

Paul Thanks for this walk through, it worked like a charm, saved me a lot of time. Ide Drive same as iastoreV ... This is now less likely to happen.Thanks again for your help 0Votes Share Flag Collapse - by Blackcurrant · 12 years ago In reply to Boot from IDE instead of ...

When I look at the F: drive in Disk Management, the F: drive is not marked as active.

Use an appropriate TeraByte Unlimited product (e.g.Image for DOS, Image for Linux, Image for Windows) to copy the contents of the IDE hard drive over to the SATA hard drive. so i wanna install under standard ide and after that do what u say because i have been told my hard drives needs AHCI on to not damage it ???? I have one QQ - after updating the registry my PC booted fine with AHCI mode enabled. Make Hard Drive Bootable Now go to following keys one by one: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\msahci HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\pciide In right-side pane, look for a DWORD "Start".

Upon restart, get into BIOS settings (by pressing DEL or F2 key most likely), change the hard disk mode to AHCI, might also have to change boot order SCSI, save settings I had planned to reformat the old 500 GB Seagate IDE drives that used to be C drives and use them for file storage. BINGBURN ............... The slave HD and optical drive should be set master and slave.

First method doesn't seem to work with Windows 8. FAQ .................... I tried this by booting from the WinXP installation disk. The optical is on master and hdd on slave now.

If you do not use BootIt BM, configure your BIOS to boot from the SATA controller. I have been running a SATA drive as my primary drive with OS and programs and 2 IDE drives for data storage. Also, if I disable GoBack and reboot, GoBack saya it is removing the GoBack history from the C: drive, and then the computer boots normally from my primary master C: drive. OS/2 ..........

I have read the manuals carefully and can't find any information on getting SATA and IDE drives to play nice together. Flag Permalink This was helpful (0) Collapse - Lost half my SATA drive by PennT / July 26, 2005 6:08 PM PDT In reply to: Mixing SATA and IDE drives in But if you want to keep the original OS... I was told because I wiped out a registry entry (related to the SATA drive setup) and there was a problem due to the fact Windows 2000 can't see anything over

You may also... Windows ............... 9X/ME ............... When I try to boot from USB/CD-DVD I get the screen you have shown above. Prior settings of the jumpers to "slave" would result in no boot screen at all upon powering on.

How do I get Windows to come up so I can apply your fix if it won’t boot from CD/DVD? While keeping the current IDE hard drive in place, install the SATA drive by connecting it to the SATA controller using an appropriate SATA cable and by attaching a power connector Other ............... After all that you change your sata to first boot and install windows 7 on the sata let it load and install.

You might need to find a decent workaround! Oh yes and too many fans trust me about the power supply problems I'm removing some fans so I hope that I don't have to replace my power supply, mixing sata But it only recognizes a floppy as the source for the SATA controller.