Home > Windows 7 > How To Install Windows 7 And Xp On The Same Computer

How To Install Windows 7 And Xp On The Same Computer

Contents

Get the answer YpayZdotComFeb 20, 2013, 11:45 PM Everything is new dear friend. I don't understand why this happens since none of the files have been changed since I began the process, unless easyBCD screwed up the bootloader… Also, when I was in XP Help, i must access my Windows 7 again December 7, 2010 Mark Two questions…. 1) How to I change AHCI to IDE in my BIOS to allow my XP install to I am trying to load XP first on the hard drive so that this won't happen, but since I don't have a Win7 OS disk, just the restore disks, I am have a peek at this web-site

Use Diskpart It is possible to make the conversion during the installation process. Any suggestions? I tried directly installed a Windows XP on my Notebook. In this case I changed the default to 5000MB but any size may be entered that falls between the minimum and maximum allowed. https://www.bleepingcomputer.com/forums/t/431173/stop-error-when-reinstalling-xp-on-partitioned-disk/

How To Install Windows 7 And Xp On The Same Computer

Check these links for more details.. Alternative error messages. How big do u recommd that I make the new partition? solved **Help** Fresh Install Of Windows 7 Setup unable to use system partition / setup was unable to create new partition solved Windows 8.1 unable to install .MSI files and unable

I don't have any idea how I would "slipstream" the drivers, as you mention. Junus Supardi February 7, 2010 John P I take it that now your system boots into Win 7 only junus ? Browse other questions tagged windows-7 windows-xp installation operating-systems or ask your own question. Install Windows 10 On Separate Partition Then goto Change settings and change default OS (the default boot one) and timeout to wait.

If there are not so many data that is required to backup, just copy and paste them to a safe place. I have a legitimate Windows XP Home disk, and I've set up a 40GB partition on the 250 GB SATA drive as instructed above. What do I need to do in order to make the expanded volume boot xp? http://www.howtogeek.com/howto/8790/dual-boot-your-pre-installed-windows-7-computer-with-xp/ Oh, by the way, Have you had a look at the links I posted last night???

This way, you don’t have to mess with boot sectors, editing BOOT.INI, or any of that stuff. How To Install Windows Xp The two drives will be visible from both OSes, so you can have data shared between the two. Reasons To answer this question, you need to know something about UEFI + GPT boot. Cause 2: The hard drive partition is damaged The hard drive's partition may become damaged because of disk write errors, power outages or virus attacks.

Dual Boot Windows 7 And Xp Separate Hard Drives

more hot questions question feed about us tour help blog chat data legal privacy policy work here advertising info mobile contact us feedback Technology Life / Arts Culture / Recreation Science Why is writing your own encryption discouraged? How To Install Windows 7 And Xp On The Same Computer SATA Controller mode was set incorrectly (with incorrect drive mode, the very disk cannot be used normally). Which Partition To Install Windows 7 System Or Primary December 22, 2010 Bryan1998 Nevermind.

You are great. Check This Out Both helped tremendously and are freeware. VistaBootPRO 3.3 (free version) will still work too which you can download here. this is safe approach to do this... Windows 7 Installation Partition Problem

As I said this tutorial rox! On EFI systems, Windows can only installed on GPT disks". Any help? Source It's an easy-to-use and automated diagnostics disk.

Convert MBR Disk to GPT Disk to Fix the Error Steps are nearly the same as those to convert GPT disk to MBR disk, and the only difference is that you My Hard Disk Partition Are Not Showing There's no guarantee you'll ever hit the partition size right on the nose but you should be able to get relatively close. Simple volumes converted from basic disks do not have an entry in the partition table unless they were system or boot volumes prior to conversion." --from Microsoft Resource That is to

Select Startup Repair and wait for the process to finish.

At this time, you can enter BIOS and set the boot mode to CSM boot or choose Both: Once the change has been made, please press on F10 to save changes, Ensure the disk's controller is enabled in the computer's BIOS menu." Reasons Generally speaking, there are 2 possible reasons: Hard disk protection is enabled. If that's the case, the operating system cannot access the system files to boot properly and the loading process is halted. How To Create Partition In Windows 7 After Installation January 8, 2010 Roi @Energokinetic Yeah if you are sure you do not need anything off your Vista partition, you can just right click it and delete it.

Dell) in my case i havent done this yet because im afraid to get a bsod and not be a able to switch back to windows 7. All rights reserved. Best answer ronintexasFeb 21, 2013, 8:20 PM Generally, when I am creating a new install, I start with one drive in the system, boot from the USB/DVD, remove all partitions, then have a peek here What ‘problems' were there om the blue screen ?

How-To Geek Articles l l How to Customize the Lock Screen on Windows 8 or 10 What Is Sling TV, and Can It Replace Your Cable Subscription? Tweet Your New Skill Error 4: Windows Cannot Be Installed to This Disk. The bigest issue to overcome today is the SATA drives. please advise.

Can I run both systems by setting the Bios to boot from usb first, then dualbooting either system, if so could you give me step by step instructions or point me In BIOS, if you find no signal showing you are using UEFI motherboard like the following picture shows, maybe you are using a traditional motherboard which supports legacy BIOS boot only. While I doubt that this is something solvable in this forum, it definitely isn’t solvable without more detailed information, including all of the above. From what Im reading, you can retro install…cant install a lower version of the OS.

Now apply the changes then insert your CD in the CD rom. January 3, 2011 Aashish Vaghela Hello HTG folks ! Thanks April 26, 2011 Jim Hajny I am running windows 7 home premium 64 bit and am wondering if I can install windows xp? Anyone have any ideas on how to fix this?

However, if it is under warranty, send it back to manufacturers because they will repair the disk or give you a new one. This is so slow it's almost useless.. I'm now completely stuck, and would be really grateful if anyone can help me out. The NeoSmart Support Forums, member-to-member technical support and troubleshooting.

You need to provide SATA drivers during XP installation or go in bios change AHCI to IDE in order for XP to work on newer computers that use SATA controller. You must take backup of you data before using this stuff. Why do ships burn in space when hit by lasers? Once an Extended partition has been created any Unpartitioned space left on the drive will no longer be left as Unallocated as in Fig. 04 above, but will now be identified

Sometime you may receive the following error message when installing Windows: "Windows cannot be installed to this disk.